中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 2423.38-2021 环境试验 第2部分:试验方法 试验R:水试验方法和导则(中英文版) Environmental testing-Part 2:Test methods-Test R:Water test method and guidance |
|||
GB/T 9766.7-2009/XG1-2020 《轮胎气门嘴试验方法 第7部分:零部件试验方法》国家标准第1号修改单(中英文版) Test method for tyre valve—Part 7:Test methods for components |
|||
GB/T 12703.8-2020 纺织品 静电性能试验方法 第8部分:水平机械摩擦法(中英文版) Textiles—Test methods for electrostatic propensity—Part 8:Test method using horizontal mechanical friction |
|||
GB/T 2423.10-2019 环境试验 第2部分:试验方法 试验Fc: 振动(正弦)(中英文版) Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) |
|||
GB/T 2423.10-2019 环境试验 第2部分:试验方法 试验Fc: 振动(正弦)(中英文版) Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) |
|||
GB/T 20851.5-2019 电子收费 专用短程通信 第5部分:物理层主要参数测试方法(中英文版) Electronic toll collection—Dedicated short range communication—Part 5:Test methods of the main parameters in physical layer |
|||
GB/T 2423.63-2019 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合(中英文版) Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) |
|||
GB/T 2423.5-2019 环境试验 第2部分:试验方法 试验Ea和导则:冲击(中英文版) Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock |
|||
GB/T 2423.48-2018 环境试验-第2部分:-试验方法-试验Ff:振动-时间历程和正弦拍频法(中英文版) Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method |
|||
GB/T 2423.61-2018 环境试验-第2部分:试验方法-试验和导则:大型试件砂尘试验(中英文版) Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen |
|||
GB/T 22324.2-2017 藏红花 第2部分:试验方法(中英文版) Saffron—Part 2:Test methods |
|||
GB/T 18271.2-2017 过程测量和控制装置 通用性能评定方法和程序 第2部分:参比条件下的试验(中英文版) Process measurement and control devices—General methods and procedures for evaluating performance—Part 2:Tests under reference conditions |
|||
GB/T 33626.2-2017 气动油雾器 第2部分:评定商务文件中包含的主要特性的试验方法(中英文版) Pneumatic lutricators—Part 2:Test methods to determine the main characteristics to be included in supplier’s literature |
|||
GB/T 5171.22-2017 小功率电动机 第22部分:永磁无刷直流电动机试验方法(中英文版) Small-power motors—Part 22:Test methods for permanent magnet brushless DC motors |
|||
YD/T 1377.3-2008 点对点网间短消息业务和协议的测试方法 第3部分:移动网和移动网间点对点短消息互通的测试方法(中英文版) Test Methods of Service and Protocol of Peer to Peer Short Message Interworking between Networks. Part3:Test Methods of Peer to Peer Short Message Interworking between PLMN and PLMN |
|||
GB/T 2423.48-2008 电工电子产品环境试验 第2部分:试验方法 试验Ff:振动-时间历程法(中英文版) Environmental testing for electric and electronic products - Part 2:Test methods - Test Ff: Vibration- Time-history method |
|||
GB/T 2423.28-2005 电工电子产品环境试验 第2部分:试验方法 试验T:锡焊(中英文版) Basic environmental testing procedures for electric and electronic products-Part2:Test methods-Test T:Soldering |
|||
GB/T 2423.27-2005 电工电子产品环境试验 第2部分:试验方法 试验Z/AMD:低温/低气压/湿热连续综合试验(中英文版) Environmental testing for electric and electronic products-Part 2:Test Methods Test Z/AMD:Combined sequential cold,low air pressure and damp heat test |
|||
YD/T 1248.4-2005 固定电话网短消息业务 第四部分 短消息中心的测试方法(中英文版) Part Ⅳ:Test methods of short message centre based on PSTN |
|||
GB/T 15812.1-2005 非血管内导管 第1部分:一般性能试验方法(中英文版) Catheters other than intravascular catheters-Part 1:Test methods for common properties |
找到:51條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 3 |